JORGE ORTEGA Posted November 27, 2018 Report Share Posted November 27, 2018 Please tell me what is wrong with this file, i need to import it but the graphic doesnot appear, but it is in the references list... I have tried with some settings but nothing helps. PILETA Y DECANTADOR CON ACCESOS.dwg PILETA Y DECANTADOR CON ACCESOS.psm Link to comment Share on other sites More sharing options...
Florian Michelin Posted November 27, 2018 Report Share Posted November 27, 2018 Hi Jorge, I am having trouble opening the files. Could you send it to me at florian.michelin@howden.com. Regards, Link to comment Share on other sites More sharing options...
JORGE ORTEGA Posted November 28, 2018 Author Report Share Posted November 28, 2018 I've send you the files... Link to comment Share on other sites More sharing options...
Florian Michelin Posted November 28, 2018 Report Share Posted November 28, 2018 Thank you I have received the files. There seem to be something strange happening with this file. I will let you know when I find what is the issue. If I am able to import it, do you me to send the pumpsim file with the import to you so you can keep working? Florian Link to comment Share on other sites More sharing options...
JORGE ORTEGA Posted November 28, 2018 Author Report Share Posted November 28, 2018 If you can do it just send me a new pumpsim file with the import. Thanks Link to comment Share on other sites More sharing options...
Florian Michelin Posted November 28, 2018 Report Share Posted November 28, 2018 Hi Jorge, I found the issue. The levels scale goes has an "All" level set up which does not show all the level only a very large range (-25000m to 25000m). The file you were trying to import was higher than that. A quick fix is to change the All maximum range to a higher value. I did that in the file I sent you. I made changes for the next version which will show everything when all levels are turned on. Link to comment Share on other sites More sharing options...
JORGE ORTEGA Posted November 28, 2018 Author Report Share Posted November 28, 2018 Where did you change this range? I´ve open the file that you send me but the problem continues. Link to comment Share on other sites More sharing options...
JORGE ORTEGA Posted November 28, 2018 Author Report Share Posted November 28, 2018 I GOT IT...MY FILE HAS MOVED IN ELEVATION FROM AUTOCAD FOR ANY REASON, THE RIGHT ELEVATION IS AROUND 300-800 MAMSL THANKS A LOT Link to comment Share on other sites More sharing options...
JORGE ORTEGA Posted November 28, 2018 Author Report Share Posted November 28, 2018 I GOT IT...MY FILE HAS MOVED IN ELEVATION FROM AUTOCAD FOR ANY REASON, THE RIGHT ELEVATION IS AROUND 300-800 MAMSL THANKS A LOT Link to comment Share on other sites More sharing options...
Florian Michelin Posted November 28, 2018 Report Share Posted November 28, 2018 Good to hear you got it going. The change in elevation can be due to the unit in which the file was saved. Florian. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.