JORGE ORTEGA Posted March 23, 2019 Report Share Posted March 23, 2019 How can I input this kind of efficiency curves??? CYAN COLOR AT IMAGE Link to comment Share on other sites More sharing options...
Florian Michelin Posted March 25, 2019 Report Share Posted March 25, 2019 Hi Jorge, There is a way to do it. I will try to explain it tomorrow as it is a bit tricky. Florian Link to comment Share on other sites More sharing options...
JORGE ORTEGA Posted March 25, 2019 Author Report Share Posted March 25, 2019 I´m waiting... 😀 Link to comment Share on other sites More sharing options...
Florian Michelin Posted March 25, 2019 Report Share Posted March 25, 2019 Hi, There is no easy way to do it but I have a small trick. See the attached video where I add all the curve in PumpSim including the efficiency curve. The idea is to click where the pressure and efficiency curve intersect. This will give the correct flow but the wrong efficiency. The efficiency then need to be overwritten to the value on the curve. See picture below. Let me know if you have further questions. PumpsimVideo_19_3_26_9_26_58.wmv Link to comment Share on other sites More sharing options...
JORGE ORTEGA Posted March 26, 2019 Author Report Share Posted March 26, 2019 Check this curve :RURHPUMPEN 150 HSM 2 1/2x10 (A) to see if i did it correctly. Thanks PRUEBA SIMULACION DINAMICA.psm Link to comment Share on other sites More sharing options...
JORGE ORTEGA Posted March 26, 2019 Author Report Share Posted March 26, 2019 Link to comment Share on other sites More sharing options...
Florian Michelin Posted March 26, 2019 Report Share Posted March 26, 2019 Yes, the curves look correct. I think it is always worth checking a point by hand per curve to see if it is correct. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.