Roy Moreby Posted October 2, 2020 Report Share Posted October 2, 2020 Hi When you create a vent duct with leakage, the leakage paths are hidden but show up in wire frame. If you select a model then move airways to another stage then all airways and ducts have the new stage settings applied but the leakage paths do not. The only way to do this is by doing the stage change in wire frame. I did not know this - can you change so leakage paths are included even if hidden or highlight this in the manual (I could not see it) Regards Roy Quote Link to comment Share on other sites More sharing options...
Martin Griffith Posted October 8, 2020 Report Share Posted October 8, 2020 Hi Roy, It is set up so that only visible airways will have the changes applied; hence the need to go to Wireframe first. We added some checks so that now Edits are applied to visible airways and also to invisible airways that would have been visible if Wireframe mode had been enabled. This means that when you select/edit in Solids mode, the changes will be applied to the Duct Leakages. We also added some checks to avoid changes being applied through the Edit Box to the Duct Leakages which would incorrectly alter their function (such as size and resistance changes). The new version with this change is available here: https://ventsim.com/download/minor-releases/ Thank you for the feedback on this. Please let us know if there is any problem with it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.